Cardinal Detecto Especificações

Price Computing ScalePrice Computing SeriesOperation ManualCardinal®CARDINAL SCALE MFG. CO.P.O. Box 151 • Webb City, MO 64870PH: 417-673-4631 • Fax: 4

8Right Side CoverCalibration SwitchCircuit BoardSETUP AND CALIBRATION PROCEDUREThis scale was calibrated at the factory and should not require adjustm

9WEIGHTSETUP AND CALIBRATION PRIOCEDURE (cont.)3a.LoAd = If recalibration is not desired, press 0 (zero) then ENTER and proceed to step five.3b. If r

10SETUP AND CALIBRATION PROCEDURE (cont.)10. tArE= Enter 0, 1, or 2 and press ENTER.0 = Disables keypad tare and enables push button tare.1 = Enables

11SETUP AND CALIBRATION PROCEDURE (cont.)13. bAUd= Enter the value for the baud rate desired and press the ENTER key.12 = 1200 baud 48 = 4800 baud 19

12STORE NAME/IDCharactersNote: All unused locations to the right are ignored.17a. bArC= Enter 1 (Yes) to provide bar code printing, 0 (No) to disable

13SETUP AND CALIBRATION PRIOCEDURE (cont.)18. donE= Indicates that calibration/setup is complete and calibration data will be stored at thistime. Pre

142. Operator keys in one or two digits (00 to 99) representing the price preset number, thenpresses the ENTER key.3. Repeat both steps to recall othe

15ERROR MESSAGESIndicates that the scale has never been setup and calibrated or has beeninterrupted during the setup and calibration sequence.Indicate

16BEFORE YOU CALL FOR SERVICE. . .Customer satisfaction is of utmost importance. Should you experience difficulty with the operation ofthis instrument

17SERIAL DATA OUT AND WEIGH ON DEMAND FUNCTIONThe PC series scale will transmit SMA Level 1 compliant serial weight data when the PRINT key isdepresse

PRECAUTIONSBefore using this instrument, read thismanual and pay special attention to all“WARNING” symbols: IMPORTANT ELECTRIC

18PC SERIES INTERFACE CABLESThe PC series scale can be interfaced to different Detecto printers as well as to a host computer.The following table list

2

UNAM&EDSIGUNEDFACTREDINUSA...UNAM&EDSIGUNEDFACTREDINUSA...

1SPECIFICATIONSPower Requirements: 115 VAC, 50/60 Hz (Optional 230 VAC, 50/60 Hz); powering a 12 VDC,700 mA wall-plug-in power moduleDimensions: Base:

2COMPONENTS AND CONTROLSWeightDisplayUnitPrice$DisplayTotalPrice$DisplayPrinterOutputCableCapacityCommodity TrayNumericKeys (10)WeightDisplayUnitPrice

3COMPONENTS AND CONTROLS (cont.)LeveledNot leveledShipping thumbscrew(located on bottom of scale)REMOVE ALL SHIPPING SCREWSBEFORE USING SCALE, TWOSCRE

4KEY FUNCTIONSThis section describes the use of each of the keys on the Price Computing Scale.The membrane keyboard is not to be operated with pointed

5KEY FUNCTIONS (cont.)Pressing the 250g/ 1/2 key computes price per 250g or 1/2lb depending on the scalemode.NOTE: With the scale mode set for kg oper

6OPERATIONNormal Unit Price1. Place commodity on scale.2. Key in unit price per pound or kilogram.3. Read total weight and total price.4. Remove commo

7OPERATION (cont.)Tare operation for known tare (container) weightNote: Known tare weights must be entered as numbers compatible with the particular s